Hog Slat Inc. Newton Grove, NC USA August 2020 4 Poultry Feeding System STEP 3 – Put the Feeder Pan (part # HS8000-1) on the grill. First hang the pan onto the grill by hooking the “clean out” hinge into the grill’s “keeper”. Now rotate the pan upwards until in place. Be sure the pan is sealed on all sides and rotate the pan “clockwise” to tighten the pan onto the grill. Some force will be needed to insure proper locking of the pan in place. Now that your pans are assembled, simply slide them onto your approved feeder tube and into position over the discharge holes.
RkJQdWJsaXNoZXIy MTA3MzU=