GrowerSELECT - HS8000 Series Classic Flood Poultry Feed Pan Installation Manual

Hog Slat Inc. Newton Grove, NC USA August 2020 8 Poultry Feeding System TWO PIECE SUPPORT CONE USAGE AND ASSEMBLY The Two Piece Support Cone was originally intended to be a replacement part allowing easy replacement of damaged feed pans without having to disassemble the feed line for replacement of broken feed pan(s). Using the Two Piece Support, the pan can be replaced by simply following the procedure below: 1. Using suitable tool, cut the top out of the existing broken feed pan assembly allowing for removal. 2. Position replacement pan assembly containing the Two Piece Replacement Support in proper orientation under feed line. 3. Removable Top must be assembled by sliding into place (from left or right side) with feed pan assembly in place. (Please Note: In the illustration below, the pan, grill and adjuster are not show for clarification but must be assembled in place before Removable Top is assembled.) 4. When assembling Removable Top (Part HS8000-6R) to support; Tabs on sides of Removable Top must be depressed to allow for assembly.

RkJQdWJsaXNoZXIy MTA3MzU=