Hog Slat Inc. Newton Grove, NC USA MARCH 2023 REV A6 5 GROW-FLEX™ Feed Systems Ground all electrical equipment for safety. Ground all non-current carrying metal parts to guard against electrical shock. Always keep safety decals in good condition and replace missing or damaged decals. 5. INSTALLATION: The HS820 mounts below an auger control unit between the drop funnel and last drop tube in the feed system. Use self- drilling screws or wire pin to mount unit. Control Unit HS693 HS593 Or equivalent Last Drop Tube HS820 Infrared Feed Controller Mounting screws NOTE ! With crushed corn, mash or other small particle size dusty feeds, mount HS820 slightly rotated (20-30 degrees) underneath auger control unit to prevent unit from prematurely detecting feed.
RkJQdWJsaXNoZXIy MTA3MzU=