GrowerSELECT HSAB75 Extended Anchor Bearing Installation Manual

Hog Slat Inc. Newton Grove, NC USA September 2018 1 Extended Anchor Bearings HSAB75E, HSAB75EC Extended Anchor Bearings (Incluye versión en español) General Installation Notes: Make sure that power is disconnected from system prior to servicing. Installation of this equipment and related OEM equipment should be in accordance with these instructions, OEM’s installation instructions and local codes (if applicable). Failure to follow specified instructions may cause damage to equipment and/or personal injury or death. Take special note of any Warnings or Safety Decals on the equipment and in manuals. Always wear protective clothing and any applicable Personal Protective Equipment (Safety Glasses and/or Ear Plugs) when working with the equipment. Discarded materials, equipment and boxes should be recycled in accordance with local and national codes. Unless otherwise specified, all Feed Delivery Systems (Diameters) are installed similarly. Safety Instructions: Read all safety messages in this manual and on equipment safety decals. Follow recommended precautions and safe operating practices. Ground all electrical equipment for safety. Ground all non-current carrying metal parts to guard against electrical shock. Always keep safety decals in good condition and replace missing or damaged decals. Overview: Eliminate problems with auger breaking and plugging when feeding out of the front bin of a tandem system. With the extended anchor bearing you can open the slide gate and remove restrictor baffles that cause bridging. The standard anchor bearing features a restrictor tube to prevent the core of the auger from overfilling. The extended anchor simply extends the restrictor tube forward to the front bin.