Hog Slat Inc. Newton Grove, NC USA August 2019 Evaporative Cooling System 6. Using supplied weatherproof wire nuts connect the High Float Switch (Switch installed at 3.50” Height) to shielded wire lead identified with the colored sticker (If sticker is missing wire can be identified as the wire coming out of the top small liquid tight in the drawing below) Orientation is non critical. 7. Using supplied weatherproof wire nuts connect the Low Float switch to the other shield wire exiting though the lower liquid tight. 8. Install the inlet bulkhead fitting and plumbing connections. A 5 foot hose is supplied with the Level rite float kit. Additional hose can be ordered and installed if a more remote location is required. 9.
RkJQdWJsaXNoZXIy MTA3MzU=