Hog Slat Inc. Newton Grove, NC USA May 2020 REV A8 12 GROW-DISK™ Feed System 8. SCREENS AND OPERATION: 1. HOME SCREEN – STATUS DISPLAY 1. LANGUAGE: Press to toggle language – Available on “HOME” screen. 2. SYSTEM DATE/TIME 3. MODE: Indicates current mode system is operating. Manual, Continuous or Timed Feeding. 4. STATUS: Indicates current status as controller steps through feeding schedule. Indicates what is happening at that present moment as well as when next feed cycle is to occur. 5. CHAIN DISK: Amp reading of Chain Disk Motor. 6. FEED SENSOR: Status of feed sensor whether “DETECTING FEED” or “NO FEED”. 7. AUGER: Status of AUGER motor. 8. FEED DUMP: Current status and next dump cycle is displayed. 9. LAST RUN-TIME: Total run time of last cycle. 10. MENU Button: Press to access MENU screen. 11. FEED NOW Button: During TIMED FEEDING ONLY. Use this to begin feed cycle immediately. Once cycle is complete, controller will automatically advance to next programmed feed cycle. 2 1 3 4 5 6 7 8 9 10 11
RkJQdWJsaXNoZXIy MTA3MzU=