Hog Slat Inc. Newton Grove, NC USA May 2020 REV A8 24 GROW-DISK™ Feed System 11. ON BOARD TEST PANEL (CALIBRATION SCREEN): During the initial installation of the controller, it may be necessary to test the function of all switches as well as calibrate the amp reading of the chain disk motor. To access this CALIBRATION, go to the SYSTEM menu and press CHANGE PASSWORD. Follow procedure to change password and input 8321 as the new password. This will not overwrite the set password. Once the password change has successfully completed, the CALIBRATION SCREEN will be visible. 1. TOGGLE SWITCH: Icon will be show “YES” if the toggle switch in ON. “NO” if the toggle switch is turn off. 2. PROX SWITCH (Feed Sensor): Since the Proximity switch contact form can be N/O or N/C, the following table will aid in understanding when the Proximity switch is detecting feed. Table shows the Icon that will be displayed under the detecting or not detecting feed. 1 2 3 4 5 6
RkJQdWJsaXNoZXIy MTA3MzU=