Hog Slat Inc. Newton Grove, NC USA March 2022 Evaporative Cooling System HSES-RA Evaporative Cooling System Ordering Information Round Style
Hog Slat Inc. Newton Grove, NC USA March 2022 2 Evaporative Cooling System ORDERING INFORMATION Available Kits Base Kits Part Number Description Replaces HSES-RABK3 Base Kit 3' Round Style 527455A HSES-RABK4 Base Kit 4' Round Style 527455A HSES-RABK Base Kit 5' Round Style 527455A HSES-RABK6A Base Kit 6' Round Style 527455A Linear Kits HSES-RA10 Kit Evaporative Cooling Round Style 10' Length 527455A Plumbing Kits HSES-RAPK Plumbing Kit Round Style Evap With 10x10x8 Tee Tank 527455A Additional Parts 60900 Tee Sdr 35 8'' (SW) 609051 Coupler 8'' SDR 35 Sewer and Drain SW HSES-RA14 Cap Rubber 8" Round Style Trough Pumps H2P-115S Pump 1/2 HP 115V Sump H2 Evap System Grower Select MULTIPLE H2P-230S Pump 1/2 HP 230V Sump H2 Evap System Grower Select MULTIPLE Systems requiring brackets are replaceable also. Support brackets for GROWER SELECT systems are custom packaged for each individual order. REPLACEMENTS ARE ACCURATE FOR ENTIRE SYSTEM INSTALLATION. INDIVIDUAL REPLACEMENT KITS SHOULD BE VERIFIED IN AXAPTA
Hog Slat Inc. Newton Grove, NC USA March 2022 3 Evaporative Cooling System System Design The following information is provided as a guide when designing Evaporative Cooling Systems. The information below includes water consumption rates and recommended pump configurations. Please take note that the information below are recommendations as individual system characteristics can vary greatly based on climate, location, design, altitude, etc… Water consumption rates are provided to determine the number of fills required for an Evaporative Cooling system. The water available for the system should be measured at the selected location for the float valve. Please keep in mind that most houses require two evaporative systems and therefore available water should be measured at both locations. The final chart below is a recommendation for pump configuration when designing GrowerSELECT Evap Systems.
Hog Slat Inc. Newton Grove, NC USA March 2022 4 Evaporative Cooling System SYSTEM ORDERING *REQUIRED* KIT COMPONENTS *BASE KIT *LINEAR KIT *PLUMBING KIT *PUMP *EVAPORATIVE MEDIA ADDITIONAL COMPONENTS EXAMPLE SYSTEM 1 60 Foot Long, 5 Foot Tall, End Feed, Single Pump System Base Kit Description Qty. Required HSES-RABK5 Base Kit 5' Round Style 1 Length Kit Description Qty. Required HSES-RA10 Kit Evaporative Cooling Round Style 10' Length Kit 6 Plumbing Kit Description Qty. Required HSES-RAPK Plumbing Kit Round Style Evap With 10x10x8 Tee Tank 1 Pump Description Qty. Required H2P-115S Pump 1/2 HP 115V Sump H2 Evap System 1 Evaporative Media Description Qty. Required H2-65E-NC Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 5' 60 Additional Components Description Qty. Required None
Hog Slat Inc. Newton Grove, NC USA March 2022 5 Evaporative Cooling System EXAMPLE SYSTEM 2 80 Foot Long, 4 Foot Tall, Center Feed, Single pump Base Kit Description Qty. Required HSES-RABK4 Base Kit 4' Round Style 2 Length Kit Description Qty. Required HSES-RA10 Kit Evaporative Cooling Round Style 10' Length Kit 8 Plumbing Kit Description Qty. Required HSES-RAPK Plumbing Kit Round Style Evap With 10x10x8 Tee Tank 1 Pump Description Qty. Required H2P-115S Pump 1/2 HP 115V Sump H2 Evap System 1 Evaporative Media Description Qty. Required H2-64E-NC Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 4' 80 Additional Components Description Qty. Required 60900 Tee Sdr 35 8" 1 TWO BASE KITS ARE REQUIRED DUE TO SEPERATION OF SYSTEM AT CENTER EXAMPLE SYSTEM 3 100 Foot Long, 6 Foot Tall, Dual End Feed, Dual pump Base Kit Description Qty. Required HSES-RABK6 Base Kit 6' Round Style 1 Length Kit Description Qty. Required HSES-RA10 Kit Evaporative Cooling Round Style 10' Length Kit 10 Plumbing Kit Description Qty. Required HSES-RAPK Plumbing Kit Round Style Evap With 10x10x8 Tee Tank 2 Pump Description Qty. Required H2P-115S Pump 1/2 HP 115V Sump H2 Evap System 2 Evaporative Media Description Qty. Required H2-66E-NC Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 6' 100 Additional Components Description Qty. Required None
Hog Slat Inc. Newton Grove, NC USA March 2022 6 Evaporative Cooling System BASE KITS HSES-RABK3 Part Number Description Quantity HSES-RA23L Panel End 3' Left Alum Open Top For Round Trough 1 HSES-RA23R Panel End 3' Right Alum Open Top For Round Trough 1 603412 Pipe PVC SCH 40 1-1/2'' X 5' Plain End 2 80509 Screw Hex Head w/ Washer 10 X 1-1/2'' SS 10 HSMANUAL-105 Manual for Installation of H2 Cool Round Style 1 HSES-RA13 Retainer End Panel Universal 2 60342FT Pipe PVC 3/4" SCH 40 Per Foot Service Only 5 HSES-RA14 Cap Rubber 8" Round Style Trough 1 HSES-RABK4 Part Number Description Quantity HSES-RA24L Panel End 4' Left Alum Open Top For Round Trough 1 HSES-RA24R Panel End 4' Right Alum Open Top For Round Trough 1 603412 Pipe PVC SCH 40 1-1/2'' X 5' Plain End 2 80509 Screw Hex Head w/ Washer 10 X 1-1/2'' SS 10 HSMANUAL-105 Manual for Installation of H2 Cool Round Style 1 HSES-RA13 Retainer End Panel Universal 2 60342FT Pipe PVC 3/4" SCH 40 Per Foot Service Only 5 HSES-RA14 Cap Rubber 8" Round Style Trough 1 HSES-RABK5 Part Number Description Quantity HSES-RA25L Panel End 5' Left Alum Open Top For Round Trough 1 HSES-RA25R Panel End 5' Right Alum Open Top For Round Trough 1 603412 Pipe PVC SCH 40 1-1/2'' X 5' Plain End 2 80509 Screw Hex Head w/ Washer 10 X 1-1/2'' SS 10 HSMANUAL-105 Manual for Installation of H2 Cool Round Style 1 HSES-RA13 Retainer End Panel Universal 2 60342FT Pipe PVC 3/4" SCH 40 Per Foot Service Only 5 HSES-RA14 Cap Rubber 8" Round Style Trough 1 HSES-RABK6 Part Number Description Quantity HSES-RA26L Panel End 6' Left Alum Open Top For Round Trough 1 HSES-RA26R Panel End 6' Right Alum Open Top For Round Trough 1 603412 Pipe PVC SCH 40 1-1/2'' X 5' Plain End 2 80509 Screw Hex Head w/ Washer 10 X 1-1/2'' SS 10 HSMANUAL-105 Manual for Installation of H2 Cool Round Style 1 HSES-RA13 Retainer End Panel Universal 2 60342FT Pipe PVC 3/4" SCH 40 Per Foot Service Only 5 HSES-RA14 Cap Rubber 8" Round Style Trough 1
Hog Slat Inc. Newton Grove, NC USA March 2022 7 Evaporative Cooling System LINEAR KITS HSES-RA10 Part Number Description Quantity HSES-RA5 Bracket Trough Support Round Style 8" 3 HSES-RA1 Support Top 10' Round Style 1 HSES-RA8 Cover Trough 10' Evaporative System Round Style 1 HSES-09 Spray Bar 10' Evaporative System Grower Select 1 HSES-RA4 Deflector Spray bar 10' Round Style 1 HSES-RA2 Retainer Pad 10' Round Style 1 HSES-HW7A Kit Hardware Evap Length Round Style 1 HSES-RA9 Pipe 8" Dia X 10' 6" Including Bell 50 lb Heat And Air Duct 1 PLUMBING KITS HSES-RAPK Part Number Description Quantity KPT75SS Valve Float 3/4" Inlet/Outlet Tank Mount Kerick (0-37 GPM) 1 KPF06 Ball Float 6" Diameter 1/4" Thread Kerick 1 HSES-RA11 Eye Bolt Assembly Kerick Valve SS 1 60024 Elbow 90 Degree Pvc 3/4'' S X Fpt (SCH 40) 3 60377 Elbow Street 90 Degree Pvc S X S 3/4'' 1 606487 Bolt U 1/4-20 X 2'' X 1-1/8'' Spread Zinc 2 606684 Nut Wing 1/4-20 Zp 4 60167 Coupling 3/4" MGHT x 3/4" MPT Brass 2 603841 Union Pvc 1 1/2'' (SCH 40) 2 S1520-15F Valve PVC Check 1-1/2" Threaded 1 60057 Adapter Pvc Male 1 1/2'' (SCH 40) 5 60052 Elbow 90 Degree Pvc S X S 1 1/2'' (SCH 40) 3 60055 Coupler Pvc 1 1/2'' (SCH 40) 1 602190 Valve Ball Pvc Compact 1 1/2" 3 603750 Tee Reducing 1-1/2" S X 1-1/2" S X 3/4" FPT PVC (SCH 40) 1 384001 Nipple PVC 3/4" X 3/4" Close Threaded 1 6021602 Valve Ball Pvc 3/4'' Female Threaded 1 LS150-12 Strainer Filter Y 1-1/2" 12 Mesh 1 60249 Tape Teflon 1/2" x 260" 1-(Roll) 1 602460 Cleaner PVC Rectorseal Pint 1 602464 Cement PVC Rectorseal 404L Regular Body Clear 32oz Quart 2 26053-04 Hose Cold Inlet 5/8'' X 4' FGHT Red 1 HSES-RA12 Tee Tank 10" X 10" X 8" Cool Cell System 1 5274670 Cap PVC 10" Round Cool Cell System 2
Hog Slat Inc. Newton Grove, NC USA March 2022 8 Evaporative Cooling System Hardware Kits PUMPS (ALL PUMPS SHIP PRE-WIRED! NO NEED FOR POWER CORD) HSES-HW7 Part Number Description Quantity HSES-RA30 Support Spray Bar Round Style 3 HM812045 Screw Lag Hex Head 5/16" X 3-1/2" Galvanized 9 HSES-RA7 Splice Pad Retainer Round Style 1 HSES-RA6 Splice Deflector Round Style 1 1170910 Nut Wing 1/4-20 SS 3 80509 Screw Hex Head w/ Washer 10 X 1-1/2'' SS 16 60602 Nut Hex 1/4-20 SS 3 9705090500 Screw Self Drilling 10-16 X 3/4" Hex Washer Head #3 Point 41 2 60686 Bolt Hex Cap 1/4-20 X 1'' SS 3 60579SS Washer Fender 1/4'' X 1-1/4" SS 6 H2P-230S Part Number Description Quantity H2P-230S Pump 1/2 HP 230V Sump H2 Evap System Grower Select 1 H2P-115S Part Number Description Quantity H2P-115S Pump 1/2 HP 115V Sump H2 Evap System Grower Select 1
Hog Slat Inc. Newton Grove, NC USA March 2022 9 Evaporative Cooling System EVAPORATIVE MEDIA Part Number Description H2-62E-CA Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6" X 12" X 2' H2-62E-NC Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6" X 12" X 2' H2-63E-NC Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 3' H2-64E-AR Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6" X 12" X 4' H2-64E-GA Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 4' H2-64E-IA Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 4' H2-64E-MS Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 4' H2-64E-NC Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 4' H2-64-OK Pad Cool Cell H2 No Edge Guard 15/45 Flute 6" X 12" X 4' H2-65.5E-OK Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 5' 6" H2-65E-AL Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6" X 12" X 5' H2-65E-AR Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6" X 12" X 5' H2-65E-B-AL Pad Cool Cell H2 15/45 Flute 6"X12"X5' W/2" Bottom EG H2-65E-B-MS Pad Cool Cell H2 15/45 Flute 6"X12"X5" W/2" Bottom EG H2-65E-CA Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6" X 12" X 5' H2-65E-GA Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 5' H2-65E-IA Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 5' H2-65E-MS Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 5' H2-65E-NC Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 5' H2-65-OK Pad Cool Cell H2 15/45 Flute 6'' X 12'' X 5' H2-66E-AR Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6" X 12" X 6' H2-66E-GA Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 6' H2-66E-IA Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 6' H2-66E-MS Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 6' H2-66E-NC Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6'' X 12'' X 6' H2-66E-OK Pad Cool Cell H2 Pro Tec Edge 15/45 Flute 6" x 12" x 6' H2-66-OK Pad Cool Cell H2 15/45 Flute 6'' X 12'' X 6'
Hog Slat Inc. Newton Grove, NC USA March 2022 10 Evaporative Cooling System AVAILABLE REPLACEMENT PARTS Image Part Number Description HSES-RA1 Support Top 10' Round Style HSES-RA2 Retainer Pad 10' Round Style HSES-RA4 Deflector Spray bar 10' Round Style HSES-RA5 Bracket Trough Support Round Style 8" HSES-RA6 Splice Deflector Round Style
Hog Slat Inc. Newton Grove, NC USA March 2022 11 Evaporative Cooling System HSES-RA7 Splice Pad Retainer Round Style HSES-RA8 Cover Trough 10' Evaporative System Round Style HSES-RA9 Pipe 8" Dia X 10' 6" Including Bell 50 lb Heat And Air Duct HSES-RA11 Eye Bolt Assembly Kerick Valve SS HSES-RA12 Tee Tank 10" X 10" X 8" Cool Cell System HSES-RA13 Retainer End Panel Universal
Hog Slat Inc. Newton Grove, NC USA March 2022 12 Evaporative Cooling System HSES-RA14 Cap Rubber 8" Round Style Trough HSES-RA30 Support Spray Bar Round Style HSES-09 Spray Bar 10' Evaporative System Grower Select HSES-RA23L HSES-RA23R Panel End 3' Left Alum Open Top For Round Trough Panel End 3' Right Alum Open Top For Round Trough HSES-RA24L HSES-RA24R Panel End 4' Left Alum Open Top For Round Trough Panel End 4' Right Alum Open Top For Round Trough
Hog Slat Inc. Newton Grove, NC USA March 2022 13 Evaporative Cooling System HSES-RA25L HSES-RA25R Panel End 5' Left Alum Open Top For Round Trough Panel End 5' Right Alum Open Top For Round Trough HSES-RA26L HSES-RA26R Panel End 6' Left Alum Open Top For Round Trough Panel End 6' Right Alum Open Top For Round Trough KPF06 Ball Float 6” Diameter 1/4” Thread Kerick KPT75SS Valve Float 3/4” Inlet/Outlet Tank Mount Kerick KSR08 Rod Float 1/4’ X 8” SS Kerick S1520-15F Valve PVC Check 1-1/2” Threaded LS150-12 Strainer Filter Y 1-1/2” 12 Mesh
Hog Slat Inc. Newton Grove, NC USA March 2022 14 Evaporative Cooling System HSMANUAL-105 GROWERSELECT Evaporative System Installation Manual Round Style 5274670 Cap PVC 10" Round Cool Cell System 60900 Tee Sdr 35 8'' (SW) 609051 Coupler 8'' SDR 35 Sewer and Drain SW
Hog Slat Inc. Newton Grove, NC USA March 2022 15 Evaporative Cooling System Hog Slat Limited Warranty Hog Slat warrants products to be free from defects in material or workmanship for a period of twenty-four (24) months from the date of original purchase. Hog Slat will credit, repair, or replace, at its option any product deemed defective within this time period. Labor costs associated with the replacement or repair of the product are not covered by the Seller/Manufacturer. Warranty Extension Coverage The Limited Warranty period is extended for the following products: Cool Cell System 5 Years (Less Pads and Pumps) Warranty Exceptions Coverage The Limited Warranty period for the following products is: Cool Cell Pumps 1 Year From Date of Purchase Cool Cell Pads 1 Year From Date of Purchase Conditions and Limitations 1. The product must be installed by and operated in accordance with the instructions published by the Seller/Manufacturer or Warranty will be void. 2. Warranty is void if all components are not original equipment supplied by the Seller/Manufacturer. 3. This product must be purchased from and installed by an authorized retailer/distributor or certified representative thereof or the Warranty will be void. 4. Malfunctions or failure resulting from misuse, abuse, negligence, alteration, accident, or lack of proper maintenance shall not be considered defects under the Warranty. 5. This Warranty applies only to components/systems for the care of poultry and livestock. Other applications in industry or commerce are not covered by this Warranty. 6. This Warranty applies only to the Original Purchaser of the product. The Seller/Manufacturer shall not be liable for any Consequential or Special Damage which any purchaser may suffer or claim to suffer as a result of any defect in the product. “Consequential” or “Special Damages” as used herein include, but are not limited to, lost or damaged products or goods, costs of transportation, lost sales, lost orders, lost income, increased overhead, labor and incidental costs and operational inefficiencies. THIS WARRANTY CONSTITUTES THE SELLER/MANUFACTURER’S ENTIRE AND SOLE WARRANTY AND THIS MANUFACTURER EXPRESSLY DISCLAIMS ANY AND ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, EXPRESS AND IMPLIED WARRANTIES AS TO MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSES SOLD AND DESCRIPTION OR QUALITY OF THE PRODUCT FURNISHED HEREUNDER. Hog Slat Retailers/Distributors are not authorized to modify or extend the terms and conditions of this Warranty in any manner or to offer or grant any other warranties for Hog Slat products in addition to those terms expressly stated above. An officer of Hog Slat must authorize any exceptions to this Warranty in writing. The Seller/Manufacturer reserves the right to change models and specifications at any time without notice or obligation to improve previous models.
Hog Slat Inc. Newton Grove, NC USA March 2022 16 Evaporative Cooling System This equipment must be installed in accordance with all State and Local Codes and applicable Regulations which should be followed in all cases. Authorities having jurisdiction should be consulted before installations are made. Hog Slat, Inc. PO Box 300 Newton Grove, NC 28366 Phone: (910) 594-0219 Fax: (910) 594-1392 www.hogslat.com Copyright © 2017 by Hog Slat, Inc. Part Number: HSMANUAL-151 Rev A2 HSART-520 Market – Hog & Poultry
hogslat.comRkJQdWJsaXNoZXIy MTA3MzU=