Hog Slat Inc. Newton Grove, NC USA March 2022 3 Evaporative Cooling System System Design The following information is provided as a guide when designing Evaporative Cooling Systems. The information below includes water consumption rates and recommended pump configurations. Please take note that the information below are recommendations as individual system characteristics can vary greatly based on climate, location, design, altitude, etc… Water consumption rates are provided to determine the number of fills required for an Evaporative Cooling system. The water available for the system should be measured at the selected location for the float valve. Please keep in mind that most houses require two evaporative systems and therefore available water should be measured at both locations. The final chart below is a recommendation for pump configuration when designing GrowerSELECT Evap Systems.
RkJQdWJsaXNoZXIy MTA3MzU=