Hog Slat Inc. Newton Grove, NC USA March 2022 13 Evaporative Cooling System HSES-06C Assembly Instructions Image HSES-06C is a new version of the evaporative trough cover. The following steps highlight the differences in assembly if you receive the HSES-06C For a 10” section of trough the only changes are (2) HSES-06C are required per 10’ section of trough. Each part measures 58” long while the HSES-06 (original 10’ trough cover) measured 116” long. To use on a 5’ section of trough the new HSES-06C must be cut to size. Each end of the tough cover has a cut guide (2 tightly spaced ribs) shown below. Using reciprocating saw cut between EITHER set of ribs. DO NOT CUT BOTH ENDS! With either end removed the cut HSES-06 measure 56” which is the same as HSES-07 (original 5’ trough section)
RkJQdWJsaXNoZXIy MTA3MzU=