Hog Slat Inc. Newton Grove, NC USA March 2022 4 Evaporative Cooling System Framing Instructions Figure 1 ACTUAL HEIGHT OF EVAPORATIVE COOLING PAD MAY VARY SLIGHTLY, THEREFORE PROPER HEIGHT OF THE SYSTEM SHOULD BE VERIFIED UTILIZING PADS TO BE INSTALLED (LUMBER NOT INCLUDED) Figure 1 above shows the typical installation dimensions for a wall mounted system. Table A provides appropriate dimensions for varying Pad heights. • Please note that in Concrete Installation the 2”X10” and 2”X4” base boards should be replaced with a single run of 2”X8” baseboards. AIR FLOW MUST PASS THROUGH SYSTEM IN DIRECTION OF ARROW ABOVE. FAILURE TO DO SO CAN RESULTS IN ISSUES DURING INSTALLATION AND OPERATION
RkJQdWJsaXNoZXIy MTA3MzU=