Hog Slat Inc. Newton Grove, NC USA June 2020 5 Feed Systems SINGLE LINE UNLOADER VERTICAL EXTENSION HOPPER PARTS LIST ITEM QTY PART NUMBER DESCRIPTION 1 4 HSFC20-2 HOPPER, EXTENSION, SIDE PANEL 2 1 HSFC20-3 HOPPER, EXTENSION, BASE PLATE 3 2 HSFC20-1 HOPPER, EXTENSION, TOP HALF 4 28 60500 BOLT, HEX, 1/4 –20 X 1/2, ZINC 5 28 60596 WASHER, LOCK 1/4” ZINC 6 28 60570 NUT, HEX 1/4 -20 ZINC 7 12 80518 SCREW, SELF DRILLING #10-16 X 5/8” ZINC 8 1 HSLABEL-053 LABEL PRODUCT GROWER SELECT NEST INSTALLATION / OPERATION 1. Mount 4 side plates (HSFC20-2) to base plate (HSFC20-3) with 8 hex bolts, lock washers, and hex nuts (60500, 60596, and 60570). 2. Use 4 self drilling screws (80518) to mount 2 top half plates (HSFC20-1) together. Then use 8 self drilling screws (80518) to mount top assembly to side plates. 3. Align completed hopper extension assembly to top of hopper and bolt down using either 1/4-20 bolts with lock washers or #10 self drilling screws (8 total required). 4. Place label (HSLABEL-053) to one side of panel. .
RkJQdWJsaXNoZXIy MTA3MzU=