Hog Slat Inc. Newton Grove, NC USA March 2018 17 Ventilation Systems Pulley Systems: The ceiling inlet and actuation system can be set up to run in a 1:1 or a 2:1 pulley system. The 1:1 configurations allows for shorter open/close times. The 2:1 configuration allows for a greater load capacity. Figures 22 and 23 provide an explanation of both systems. 1:1 Ratio (Figure 22) 1:1 Ratio Direct Pull (Figure 23) 2:1 Ratio (Figure 24) For each (1) inch travel of the machine there is (1) inch travel of the Load. 1,000lb max each side = 2,000lb total load. For each (2) inch travel of the machine there is (1) inch travel of the Load. 2,000 max each side = 4,000lb total load 2,000lb max 2,000lb max 1,000lb max 1,000lb max 2,000lb max For each (1) inch travel of the machine there is (1) inch travel of the Load. 2,000lb one side total load
RkJQdWJsaXNoZXIy MTA3MzU=