Hog Slat Inc. Newton Grove, NC USA March 2018 9 Ventilation Systems STEP 3: Pull the tabs on the end of the insulation stop through the slot located on the other end of the insulation stop to form a rectangle. Fold the corner of the insulation stop so that the tabs are tucked into the inside of the rectangle. Folded Insulation Stop (Figure 5) Step 4: Slide the insulation stop inside of the frame. Fasten the insulation stop to the frame using staples, nails, or screws (not provided). Leave a small gap between the lower edge of the 2X6 framing and the bottom edge of insulation stop to avoid interference with the ceiling inlet. Insulation Stop Bottom/Side View (Figure 6)
RkJQdWJsaXNoZXIy MTA3MzU=