GrowerSELECT - HST1743 Turkey Feed Level Adjustment Winch Kit Instction Manual

Hog Slat Inc. Newton Grove, NC USA January 2022 1 Turkey Floor Feeding Systems HST1743 Turkey Feed Level Adjustment Winch Kit Assembly and Installation Instructions General Installation Notes: Make sure that power is disconnected from system prior to servicing. Installation of this equipment and related OEM equipment should be in accordance with these instructions, OEM’s installation instructions and local codes (if applicable). Failure to follow specified instructions may cause damage to equipment and/or personal injury or death. Take special note of any Warnings or Safety Decals on the equipment and in manuals. Always wear protective clothing and any applicable Personal Protective Equipment (Safety Glasses and/or Ear Plugs) when working with the equipment. Discarded materials, equipment and boxes should be recycled in accordance with local and national codes. Unless otherwise specified, all Feed Delivery Systems (Diameters) are installed similarly. Note: Assembly is to be wired in accordance with all applicable local and national electrical wiring codes. All wiring sizes and fuse capacities are to be sized according to applicable electrical code specifications or other regulations. Safety Instructions: Read all safety messages in this manual and on equipment safety decals. Follow recommended precautions and safe operating practices. Ground all electrical equipment for safety. Ground all non-current carrying metal parts to guard against electrical shock. Always keep safety decals in good condition and replace missing or damaged decals. Important Installation Notes and Considerations: GrowerSELECT’s Adult Turkey Feeder can be fitted to provide a winch adjustable Feed Level Cone. This feature is applicable to existing systems or new installations. Maximum length of each winch is 200 feet (61 meters). The winch should be located in the center of the feeders to be adjusted. If feed line is longer than 200 feet (61 meters), more than one winch will be required. Figure 1 Turkey Pan Feed Rings are adjusted (winched) up to allow for maximum flooding and access by young turkeys. The Feed Rings can be lowered as the birds grow to better control amount and level of feed. For Existing System Installations, Power must be disconnected from Anti-Roost System prior to Winch installation. Once exact winch location is determined, the Anti-Roost Cable should be temporarily removed from that area and saved for reconnection after winch installation.

Hog Slat Inc. Newton Grove, NC USA January 2022 2 Turkey Floor Feeding Systems Installation Procedure: 1. Attach the 10” long spring to tube clamp bolt at one end of Feed Line, then attach 3/32” diameter cable to other end of spring with cable clamp. (Figure 2) 2. Locate center of Feeders to be adjusted (Maximum distance of 200’ or 61 meters) and assemble the winch assembly and Insulator Brackets to Feed Line using the two feed tube clamps. Note that Insulator Bracket must be oriented with the pulley open side away from winch. Tighten accordingly. Attach supplied Winch Handle to Winch with supplied Nut and tighten. (Figure 3) 3. Feed the Cable through the slots on top of Feeder Support Cones (Figure 4) and under Tube Clamp Bolts (Figure 5). (It may be necessary to adjust Tube Clamps with bolts on top of tube on existing installations). Figure 2 Figure 3 Figure 4 Figure 5

Hog Slat Inc. Newton Grove, NC USA January 2022 3 Turkey Floor Feeding Systems 4. Route Cable under pulley on Insulator Bracket, under Winch Center Hub, up through clamp and back down through other side of clamp. Cable should be wrapped on same side of Winch Center Hub as cable first threaded through bracket, then under Winch Center Hub. 5. Wrap Cable once around Winch Center Hub. (Clockwise in Figure 6, below) 6. Route Cable under second Insulator Bracket pulley and feed Cable through the slots on top of Feeder Support Cones and under Tube Clamp bolts on other end of Feed Line. 7. Install second 10” Long Spring to Tube Clamp on other end of Feed Line and connect Cable to Spring with Cable Clamp same as other end. 8. Turn Winch handle to pretension Winch System so there is 1” (25mm) stretch on each 10” Spring. Figure 6

Hog Slat Inc. Newton Grove, NC USA January 2022 4 Turkey Floor Feeding Systems Assembling Feeder Lift Cables: 1. Install Lift Cables to each Feed Level Ring so that the Cable Stop is on outside of Feed Level Ring with Cable on inside of Feed level Ring (Figure 7). Feed Level Ring should be positioned in third hole from bottom for most adult turkey applications. 2. Lift Cables should be fed up and through holes in Pan Shield from bottom. Make sure that all cables are up and through the holes on each side Pan Shield on top of Adult Turkey Feeder (Figure 8 Below). Check for function and free movement by lifting the Feed Ring Assembly with the Lift Cables. 3. Starting with Feeder closest to Winch Assembly, orient Lift Cables toward Winch and attach to main Winch Cable with supplied plastic split bolt nut. Tighten nut securely. Please make sure the Lift Cables are oriented toward the Winch. 4. Once all Feeder Lift Cables are connected, check tightness of all Clamps. Winch up and down several times to check for proper function. Note: Additional adjustment of Feed Level Rings and Lift Cables may be required to achieve desired feed level after Feeder System operates. Figure 7 Figure 8

Hog Slat Inc. Newton Grove, NC USA January 2022 5 Turkey Floor Feeding Systems Anti-Roost Installation at Winch When reconnecting the Anti-Roost System on existing installations or new installations; there is a piece of 16” (406mm) long Black Insulation Sleeving supplied with Winch Kit that should be installed on anti-roost cable over the Winch unit. The sleeving and cable should be routed under insulator on top of Insulator Bracket with Pulley up and over the Pulley on top of Winch. Sleeving should be centered on Anti-Roost Cable. (Please see Figure 9). Figure 9

Hog Slat Inc. Newton Grove, NC USA January 2022 6 Turkey Floor Feeding Systems This Page Intentionally Left Blank

Hog Slat Inc. Newton Grove, NC USA January 2022 7 Turkey Floor Feeding Systems Hog Slat Limited Warranty Hog Slat warrants products to be free from defects in material or workmanship for a period of twelve (12) months from the date of original purchase. Hog Slat will credit, repair, or replace, at its option any product deemed defective within this time period. Labor costs associated with the replacement or repair of the product are not covered by the Seller/Manufacturer. Conditions and Limitations 1. The product must be installed by and operated in accordance with the instructions published by the Seller/Manufacturer or Warranty will be void. 2. Warranty is void if all components are not original equipment supplied by the Seller/Manufacturer. 3. This product must be purchased from and installed by an authorized retailer/distributor or certified representative thereof or the Warranty will be void. 4. Malfunctions or failure resulting from misuse, abuse, negligence, alteration, accident, or lack of proper maintenance shall not be considered defects under the Warranty. 5. This Warranty applies only to components/systems for the care of poultry and livestock. Other applications in industry or commerce are not covered by this Warranty. 6. This Warranty applies only to the Original Purchaser of the product. The Seller/Manufacturer shall not be liable for any Consequential or Special Damage which any purchaser may suffer or claim to suffer as a result of any defect in the product. “Consequential” or “Special Damages” as used herein include, but are not limited to, lost or damaged products or goods, costs of transportation, lost sales, lost orders, lost income, increased overhead, labor and incidental costs and operational inefficiencies. THIS WARRANTY CONSTITUTES THE SELLER/MANUFACTURER’S ENTIRE AND SOLE WARRANTY AND THIS MANUFACTURER EXPRESSLY DISCLAIMS ANY AND ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, EXPRESS AND IMPLIED WARRANTIES AS TO MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSES SOLD AND DESCRIPTION OR QUALITY OF THE PRODUCT FURNISHED HEREUNDER. Hog Slat Retailers/Distributors are not authorized to modify or extend the terms and conditions of this Warranty in any manner or to offer or grant any other warranties for GrowerSELECT products in addition to those terms expressly stated above. An officer of Hog Slat must authorize any exceptions to this Warranty in writing. The Seller/Manufacturer reserves the right to change models and specifications at any time without notice or obligation to improve previous models.

Hog Slat Inc. Newton Grove, NC USA January 2022 8 Turkey Floor Feeding Systems This equipment must be installed in accordance with all State and Local Codes and applicable Regulations which should be followed in all cases. Authorities having jurisdiction should be consulted before installations are made. Hog Slat, Inc. PO Box 300 Newton Grove, NC 28366 Phone: (910) 594-0219 Fax: (910) 594-1392 www.hogslat.com Copyright © 2022 by Hog Slat, Inc. Part Number: HSMANUAL-265 Rev IR Market: Poultry Product Group: Hog Slat

RkJQdWJsaXNoZXIy MTA3MzU=