GrowerSELECT - HST1743 Turkey Feed Level Adjustment Winch Kit Instction Manual

Hog Slat Inc. Newton Grove, NC USA January 2022 2 Turkey Floor Feeding Systems Installation Procedure: 1. Attach the 10” long spring to tube clamp bolt at one end of Feed Line, then attach 3/32” diameter cable to other end of spring with cable clamp. (Figure 2) 2. Locate center of Feeders to be adjusted (Maximum distance of 200’ or 61 meters) and assemble the winch assembly and Insulator Brackets to Feed Line using the two feed tube clamps. Note that Insulator Bracket must be oriented with the pulley open side away from winch. Tighten accordingly. Attach supplied Winch Handle to Winch with supplied Nut and tighten. (Figure 3) 3. Feed the Cable through the slots on top of Feeder Support Cones (Figure 4) and under Tube Clamp Bolts (Figure 5). (It may be necessary to adjust Tube Clamps with bolts on top of tube on existing installations). Figure 2 Figure 3 Figure 4 Figure 5

RkJQdWJsaXNoZXIy MTA3MzU=