Hog Slat Inc. Newton Grove, NC USA February 2019 6 Wind Storm Fans 9. Attach cone exit guard to the cone using supplied fasteners. Wrap the cable around the bottom exit mounting bolt and tighten to secure cable. 10. From inside the house attach the butterfly bracket and springs to the butterfly frame and doors as shown. ! ROTATE PROP TO ENSURE ADEQUATE CLEARANCE BETWEEN PROP AND SPRINGS! IF THERE IS INTERFERENCE ADJUST PROP LOCATION ON SHAFT SPRING CONNECTS THROUGH HOLE/ATTACHES TO BOLT
RkJQdWJsaXNoZXIy MTA3MzU=