GrowerSELECT - Chicken Breeder Nests Center Belt Installation Manual

Hog Slat Inc. Newton Grove, NC USA August 2019 10 Breeder Nests System Nest Ends / Egg Belt Tray 13. Install the Nest Ends to each end of the first half of the nest assembly, as shown below. 14. Attach Egg Belt Tray to the first half of the nest assembly by riveting to the bottom hole of each Nest Partition. The Nest Ends must be riveted with the rivet head on the egg belt side of nest. Nest End Nest End Rivet Direction Egg Belt Tray Rivet Direction To prevent belt damage, the Egg Tray must be riveted from the tray side into the nest Partitions.