GrowerSELECT - Chicken Breeder Nests Center Belt Installation Manual

Hog Slat Inc. Newton Grove, NC USA August 2019 17 Breeder Nests System End Tensioner Installation 32. Attach the End Tensioner assembly to the end of the nests by riveting through the tensioner panel into the nest end panel. 33. Attach the winch cable to the eyebolt at the end of the tensioner. 34. Reattach Tensioner cover and secure using the ¼-20x.50” bolts provided. Belt Routing at Tensioner End Winch point Nest End Panel Rivets ¼-20x.50” bolt Belt Cover