GrowerSELECT - Chicken Breeder Nests Center Belt Installation Manual

Hog Slat Inc. Newton Grove, NC USA August 2019 7 Breeder Nests System Top / Stringer / Nest Front 3. Install the Nest Tops by riveting through the Back Panel and then the top of the Partition. Add the end Partition at this step. 4. Starting with the top holes of the Nest Stringer, Rivet to the front of each Partition. 5. Add the Front and rivet from the Partition side, through the stringer and into the Front as shown. DO NOT Rivet top corner holes at this step. Top Corner Rivet is left out at this step, both ends Nest top Nest Stringer Nest Front