GrowerSELECT - Chicken Breeder Nests Side Belt Installation Manual

Hog Slat Inc. Newton Grove, NC USA August 2019 10 Breeder Nest Systems Nest Flipper / Perch Supports 14. Slide the nest flipper over the tabs on the suspension brackets. Secure using the 3/32” cotter pin 15. Install Perch Brackets by pushing the rectangle base of the perch bracket through the rectangle hole on the Nest Front, then rotating 90° until it snaps into place. 16. Install the Perch Tube by snapping down into the perch brackets. 17. Secure the perch to one perch bracket using the #10 self-drilling screw as shown. Cotter Pin Perch Tube Perch Bracket #10 self-drilling screw Only secure at one perch bracket.