GrowerSELECT - Chicken Breeder Nests Side Belt Installation Manual

Hog Slat Inc. Newton Grove, NC USA August 2019 11 Breeder Nest Systems Nest Isle Tray / Connecting Nests / Winching 18. Slide the nest together “end to end”. Over lapping the two end suspension brackets, bolt together using four #10-24 screws. 19. For nest to nest connection; Attach the Egg tray connector to one nests using 4 rivets on each side. 20. Assemble the Aisle Tray cover to the Aise tray. 21. For the Isle Tray Connection; Attach the Egg Tray Connector to the nest using 2 rivets on each side. Attach the Isle Tray to the Egg tray connector using 1 rivet on each side to allow movement while winching. 22. Attach cable to each suspension bracket. Aisle Tray Cover Aisle Tray Egg Tray Connector