GrowerSELECT - Chicken Breeder Nests Side Belt Installation Manual

Hog Slat Inc. Newton Grove, NC USA August 2019 7 Breeder Nest Systems Nest Stringer / Plastic Fronts 4. Rivet all Plastic Fronts to the Stringer. 5. Attach the nest stringer assembly to the nest partitions by riveting only the bottom holes. Plastic fronts should be inside the nest holes. 6. While riveting the top row, slide the Tray Brace up through the large slot and rivet between the stringer and partition. Three locations on each side. Nest Stringer Nest Plastic Fronts Nest Stringer Assembly from step 4. Tray Brace Note Rivet direction, Rivet head must be on the plastic side.