GrowerSELECT - Chicken Breeder Nests Side Belt Installation Manual

Hog Slat Inc. Newton Grove, NC USA August 2019 9 Breeder Nest Systems Nest Closure / Belt Cover / Suspension Brackets 10. Bolt the End Suspension Bracket to the nest back plate with the #10-24 screws provided. Bolt the second bracket on the opposite side as the first bracket. 11. Bolt the Center Suspension Bracket to the center of the nest back plate. 12. With the Belt cover open, rivet the hinges from the hinge side. 13. If the metal closure option is chosen, attach the closure door to the nest top with the hinges as shown. Do not bolt through the outer two holes. These holes will be used to splice nest together. End Suspension bracket bolted on front side End Suspension bracket bolted on back side. Center Suspension Bracket