Hog Slat Inc. Newton Grove, NC USA November 2021 6 Feed Systems INSTALLATION / OPERATION 1. When a standard length of trough needs to be shortened, squarely cut the trough to the dimensions below (See Figure C). 2. Field drilled holes (4) in trough (1) and install chain guide (3) into trough (1) and drive unit (2) (See Figure D). 3. Install eye bolt (52088 – inside kit HSFC11-HB) enough as to ensure it doesn’t hit the Drive unit gear, HSFC11-11 inside the housing (See Figure D). 4. Insert the final piece of trough under the chain guide, HSFC11-29 (1 way systems) or power shoes (2 way systems). Once the final trough is in place, tighten the bolts holding the chain guide. FIGURE C –SHORTENED TROUGH FIGURE D DIMENSION REF. DESCRIPTION A 2-5/8” (6.67 cm) B 2-1/2” (6.35 cm)
RkJQdWJsaXNoZXIy MTA3MzU=