Hog Slat Inc. Newton Grove, NC USA March 2024 1 Hen Flooring Growers Select Hen Slats 24” x 48” 6.7 pounds, Polypropylene material. 24” x 60” 8.2 pounds, Polypropylene material
Hog Slat Inc. Newton Grove, NC USA March 2024 2 Hen Flooring 2” x 6” Runners 1” x 6” end caps PF-P24X48 Using 3 Runners PF-P24X48 Using 4 Runners PF-P24X60 Using 4 Runners Only
Hog Slat Inc. Newton Grove, NC USA March 2024 3 Hen Flooring Grower Select Hen Slats 24” x 48” and 24” x 60” (7 slats / frame) Screw Flat Head Square Drive, Type 17 #10 x 2 1/2" Zinc (9 screws / slat with 3 runners) (12 screws / Slat with 4 runners) Long Runners = 2" x 6" Pressure Treated Lumber End Caps = 1" x 6" Pressure Treated Lumber 1) Install the first slat centered on the runners and flush with end cap (locking tabs will hang over end cap) 2) Set the next slat on runner approximately 2” out of center and slide until flush to lock the tabs together. 3) Secure with screws and continue for entire frame assembly
Hog Slat Inc. Newton Grove, NC USA March 2024 4 Hen Flooring This equipment must be installed in accordance with all State and Local Codes and applicable Regulations which should be followed in all cases. Authorities having jurisdiction should be consulted before installations are made. Hog Slat, Inc. PO Box 300 Newton Grove, NC 28366 Phone: (910) 594-0219 Fax: (910) 594-1392 www.hogslat.com Copyright © 2024 by Hog Slat, Inc. Part Number: HSMANUAL-343 Rev IR Market –Poultry
hogslat.comRkJQdWJsaXNoZXIy MTA3MzU=