Hog Slat Inc. Newton Grove, NC USA May 2023 8 Poly Storm Fans 3. Using a 1/2” drill bit, drill a relief hole in the housing at desired location for entry of power cord ! ENSURE HOLE LOCATION WILL NOT ALLOW POWER CORD TO APPROACH THE PATH OF THE ROTATING FAN BLADE OR SHUTTER ACTION! Also ensure hole location will not allow excessive entry of water during adverse weather conditions 4. From the interior of the house use the rest of WS-HW1 hardware package contents to secure the shutter to the fan inlet opening. Place shutter into fan inlet opening. Ensure shutter is oriented so shutter will swing upward when air flows from the interior of the house through the fan to the exterior of the house. 5. Attach (8) shutter retainer clips with aluminum washer and self tapping screw to fan housing. Space the retainer clips evenly between securing screws applied in step 7. THIS COMPLETES THE HOUSING ASSEMBLY OF THE FAN
RkJQdWJsaXNoZXIy MTA3MzU=