Hog Slat Inc. Newton Grove, NC USA May 2023 22 Poultry Feed Systems Feeder Pan and Tube Assembly Process 1. Slide one Feeder Pan Assembly per hole onto the auger tubes. Note: Install all the feeders on the tube in the same orientation. When sliding the feeders on the tube, make sure the grill openings are on the same side of the tube and the adjustment numbers are positioned toward center of house. 2. Rotate the auger tubes so that the seam is down, this holds the Pan Assemblies in place on the tubes. Feeder Tube Feeder Pan Assembly Assemble and Suspend the Feeder Line 1. The auger tubes and feeders may be laid out end to end in approximately the final location of the line. The belled end of each tube should be toward the Hopper end of the line. 2. Connect the individual feeder tubes together by inserting the straight end of one tube as far as possible into the belled end of the next tube. 3. Place a Tube Clamp assembly at each tube joint.
RkJQdWJsaXNoZXIy MTA3MzU=