Hog Slat Inc. Newton Grove, NC USA May 2023 29 Poultry Feed Systems The End of Line Control (EOL) Unit must be at least 10 feet from the end of the building to allow birds access around the end of the feeder line. 1. Assemble the EOL unit to the Feeder Line Tube using a tube clamp. DO NOT INSTALL THE POWER UNIT AT THIS TIME. 2. Install the Poultry Weldment by sliding the straight end of the weldment into the belled end of the feeder tube. Install a clamp/anti-roost bracket on the bell and tighten. DO NOT INSTALL ANCHOR BEARING AT THIS TIME. Clamp Cap Retainer Tube Anchor Bearing Weldment Cannonball Clamp/Anti-Roost Bracket Kit
RkJQdWJsaXNoZXIy MTA3MzU=