Hog Slat Inc. Newton Grove, NC USA May 2023 35 Poultry Feed Systems Auger Overlap Distance Model 44 1.0” to 1.125” 25 to 29 mm File all sharp edges at brazed connections. 9. With locking pliers still attached, insert auger over the anchor and through the Auger Clamp until auger touches Anchor Bearing. Figure 18 shows the proper assembly of the Model 44 unloader components. Torque the set screw into Auger Clamp 10-12 ft.-lbs. Over tightening the set screw may cause damage to the Auger Clamp. Figure 18. Model 44 Anchor and Bearing Installation 1 Anchor Bearing Clamp 2 Anchor Bearing 3 Auger Clamp 4 Screw for securing auger to the anchor 5 Auger 6 Unloader Some of the Unloader Models have Anchor and Bearing Assemblies with Restrictors that may be shortened, if necessary, to increase capacity.
RkJQdWJsaXNoZXIy MTA3MzU=