Hog Slat Inc. Newton Grove, NC USA May 2023 9 Poultry Feed Systems STEP 1 – Insert the Feeder Support (part # HS8000-4) into the Feeder Adjuster (part # HS8000-3). Note: Guide tabs on Feeder Support (part # HS8000-4) should be positioned in corresponding slots on Feeder Adjuster. Support Adjuster STEP 2 – Holding the assembled Support and Adjuster with one hand, place the gray Feeder Grill (part # HS8000-2) over the top of the Feeder Support so that it comes to rest around both the Support and Adjuster. Note the small “arrow” in the Adjuster this arrow should be pointing at the numbered setting you desire. If you’re not sure what setting you desire, start with setting # 4. This setting does not affect the “Flood” feature of the pan and is easy to change later if need arises.
RkJQdWJsaXNoZXIy MTA3MzU=