Hog Slat Inc. Newton Grove, NC USA November 2021 6 Wind Storm Fans Installation IMPORTANT NOTE: THIS FAN SHOULD NOT BE INSTALLED IN A STATIC PRESSURE APPLICATION. Brackets Orient brackets (WS-36410) as shown in the image below and fasten with (5) 6088612 sheet metal screws. If the fan panels don’t have a pre-drilled hole then drill a 3/16” hole for each screw using the WS-36410 bracket as a template leaving a 1/2” gap to slide the shutter into. Figure 2: WS-36410 Bracket Installation
RkJQdWJsaXNoZXIy MTA3MzU=