Hog Slat Inc. Newton Grove, NC USA December 2022 10 Wind Storm Fans 8. Attach assembled fan to cone housing. This step required 2 installers. Begin by “hooking” the top of the venture with the top of the cone. Rotate cone to align mounting holes with mounting brackets. Use supplied sheet metal screws (805057) to secure cone to brackets. 9. This step is optional. If an on center spacing distance of 68” or greater was chosen move to step 10. In the event on center spacing of less than 68” was chosen cone panels can be deformed along perforated line and bolted to each other provide uniform airflow and to eliminate opposing vibration. MOVE BACK TO INTERIOR OF HOUSE TO INSTALL SHUTTER 10. Insert shutter into fan housing by sliding the shutter under the top retaining lip until bottom of shutter can insert into bottom of housing retainer. THIS COMPLETES THE HOUSING ASSEMBLY OF THE FAN
RkJQdWJsaXNoZXIy MTA3MzU=