Hog Slat Inc. Newton Grove, NC USA January 2023 REV A1 7 Pit Scraper Systems MAXIMUM RUN TIMER RELAY Pre-Soak timer setting To adjust the pre-soak time delay, simply rotate dial clockwise or counter clockwise to the desired number of minutes for the pre-soak valve to open prior to the scrape cycle to begin. Timer is located to the left of the 24 Hour Clock. To disable pre-soak operation, set pre-soak timer to minimum value. Function: Set to “ld” only Time: Value multiplied by “Range” For example for 18 minutes, set to “3” (3 x .1h or 3 x 6minutes) Time Range: Most common setting “.1h” FIGURE 2
RkJQdWJsaXNoZXIy MTA3MzU=