Hog Slat HS667 Series Linear Actuator Installation Operation Manual

Hog Slat Inc. Newton Grove, NC USA May 2019 REV A12 1 Ventilation Systems HS667(x) SERIES LINEAR ACTUATOR (Includes Spanish Version - Incluye versión en español) (Includes French Version - Comprend la version française) Installation Notes: Make sure that power is disconnected from system prior to servicing. Installation of this equipment and related OEM equipment should be in accordance with these instructions, OEM’s installation instructions and local codes (if applicable). Failure to follow specified instructions may cause damage to equipment and/or personal injury or death. Take special note of any Warnings or Safety Decals on the equipment and in manuals. Always wear protective clothing and any applicable Personal Protective Equipment (Safety Glasses and/or Ear Plugs) when working with the equipment. Discarded materials, equipment and boxes should be recycled in accordance with local and national codes. Note: Linear Actuator Assembly is to be wired in accordance with all applicable local and national electrical wiring codes. All wiring sizes and fuse capacities are to be sized according to applicable electrical code specifications or other regulations. Safety Instructions: Read all safety messages in this manual and on equipment safety decals. Follow recommended precautions and safe operating practices. Ground all electrical equipment for safety. Ground all non-current carrying metal parts to guard against electrical shock. Always keep safety decals in good condition and replace missing or damaged decals. Overview: The Hog Slat Linear Actuator Assembly is designed to be used with automatic ventilation control. This unit provides bi-directional control with potentiometer feedback for position sensing. Electrical Specifications: Model# Voltage Rating Amp Rating (watts) Frequency HS667x-24 120 VAC 1.4A (167W) 60 Hz HS667x-24-240 240 VAC .8 A(167W) 50/60 Hz Position sensor: 10K Ω potentiometer: .650Ω to 6.4KΩ (Closed to Fully Extended) output range Max Duty Cycle: 20%, 12 min / hours