Hog Slat HS667 Series Linear Actuator Installation Operation Manual

Hog Slat Inc. Newton Grove, NC USA May 2019 REV A12 2 Ventilation Systems Mechanical Specifications: Max Load: 350 Kgs / 772 lbs Max Speed: HS667 6.3mm [1/4”] / second @ 60Hz or 5.4mm [7/32”] / second @ 50 Hz. HS667B 2.0mm [ 5/64”] / second @ 60Hz or 1.7mm [1/16”] /second @ 50 Hz. Stroke Length: 610mm / 24” HS667(x)-24 SERIES LINEAR ACTUATOR ASSEMBLY (see Figure 1) REF# PART # DESCRIPTION 1 HS633 ENCLOSURE ASSEMBLY, LINEAR ACTUATOR 2 HS667(x)-24 OR HS667(x)-24-240 LINEAR ACTUATOR, 120 VAC @ 60Hz LINEAR ACTUATOR, 240 VAC @ 50/60 Hz Installation: 1. Determine mounting configuration . Protect unit from pressure washing as this could damage seals and force water into unit resulting in damage to the electrical components. 2. Position and secure mounting bases to linear actuator extension tube with supplied hardware. Place mounting bases at approximate distances as shown along extension tube. 3. Secure Linear Actuator machine to wall or ceiling using (8) 5/16” x 2” lag bolts provided Figure 1 or optional mounting plate shown in Figure 2. 4. Wire actuator to control device. (See Figure 3 and 4 ) Figure 1 Figure 2 Secure mounting bases using 5/16” x 2” lag bolts Optional mounting base with hardware HS667-01