Hog Slat Inc. Newton Grove, NC USA July 2024 REV A5 15 Ventilation System Anytime a selection is made to the left most side Icons to make a change to any of the options, the system will revert back to the MAIN screen even if the unit is in test mode. The “TEST MODE” indicator will be illuminated. At any time you can go back to “TEST MODE” screen by simply pressing the TEST MODE indicator from the MAIN screen. 14D. TEMPERATURE UNITS: Units currently being used is displayed. To change temperature units, press the button icon once to toggle to alternate units. 14E. SELECT MOTOR CURVE STAGE 1: Stage 1 is a variable speed output. Refer to “Motor Curves” section in this manual or motor curve tables under the HELP function (14G) for information regarding motor types, models and curves that best fit. Based on motor being used, select the best motor curve to provide desired motor operation during speed control down to 50% of full speed. 14F. SELECT MOTOR CURVE STAGE 2: Stage 2 is a variable speed output. Refer to “Motor Curves” section for information regarding motor types, models and curves that best fit. Based on motor being used, select the best motor curve to provide desired motor operation during speed control down to 50% of full speed. 14G. HELP: Press the HELP button to open a screen with helpful information and description of the screen detail, variables and Motor Curve tables. 14H. IMPORT/EXPORT: Press Icon to launch this function which allows user to export settings to a USB drive for safe keeping or import those settings into another controller (see below IMPORT/EXPORT DATA section for detail.) 14I. MANAGE PASSCODE: Select to manage passcode protection. PASSCODE ENABLE: Current setting is displayed. Press button to turn ON or OFF passcode protection. Once turned on, the user will be directed to create new passcode. Once passcode is created, user will not be able to navigate past the initial idle screen. FACTORY set passcode is 1234. Default passcode for the controller is 13269 in case passcode is lost. CHANGE PASSCODE: In order to change passcode. Press CHANGE PASSCODE. New pop-up screen will appear to enter OLD password first, then enter NEW password. To enter NEW passcode, simply press WHITE bar which will bring up numeric screen to enter passcode. Indicator of TEST MODEL, but also short cut to TEST PANEL SCREEN
RkJQdWJsaXNoZXIy MTA3MzU=