Hog Slat Inc. Newton Grove, NC USA April 2017 3 Egg Belt Installation If using a sewing machine, sewing must be done per the following steps. Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 A NEW BELT WILL STRETCH DURING THE FIRST TWO WEEKS OF OPERATION. Operator must make adjustments by removing splice, trimming excess belt, snug to fit and re-sewing. Only tighten belt enough to allow for loose operation. WARRANTY DOES NOT COVER PREMATURE WEAR FROM: 1. Excessive weight from the infrequent gathering of eggs. 2. Use of detergents or disinfects to clean belt. Use cold water only. 3. Rodent damage. 4. Damage from older nest systems. IMPORTANT: ANY FRAYED AREAS IN THE BELTS FROM RODENT OR MECHANICAL DAMAGE SHOULD BE FUSED TOGETHER WITH A PROPANE TORCH OR HEAT GUN TO PREVENT SNAGS.
RkJQdWJsaXNoZXIy MTA3MzU=