Hog Slat Inc. Newton Grove, NC USA January 2024 5 Feed Bins Installation Installation of the Hog Slat Fall Arrest System must be supervised by a Qualified Person. Inspect all components of the system prior to beginning installation to ensure no damage occurred during shipping. In the event any damage is discovered during the pre-installation inspection, contact Hog Slat for replacement guidance. WARNING! 2. Install Anchor Bracket Centered to the Roof Ladder. Secure to feed bin using HS712 Bin Bolt and HS-722 Bin Flange Nut. Tighten to 18 ft. lb torque. Use Hardware supplied with system only. 1. Attach the Cable Assembly to Anchor using GST-LS8044 Safety Shackle using the cotter pin to retain the nut. GST-LS8001G for 22” Peak Ring GST-LS8026G for 20” Peak Ring GST-LS8044 HS712 HS722
RkJQdWJsaXNoZXIy MTA3MzU=