Hog Slat Inc. Newton Grove, NC USA Sept. 2021 20 Feed Bins Ladder Top mount brackets GST-LS6407 (9’ tank) GST-LS6408 (6’ tank) GST-LS6409 (7’ tank) GST-LS6410 (12’ tank) Ladder Assembly 1. Attach the roof ladder stand-off brackets at the third hole down from the collar. Centered on the Roof Panel that has the ladder reinforcement bracket. 2. Attach the Ladder top mount brackets (left and right handed) at the fourth hole from each roof seam (5 holes in between and centered on roof panel). 3. Mount the curved ladder support channel to the legs through the nearest available hole to the X-brace mounts (Using the HS716 3/8” x 1” Gr8 bolts and HS724 3/8” serrated flange nut). 4. Continue to mount the GST-LS6403 vertical ladder mount bracket to each horizontal sidewall seam and at the Curved ladder support channels immediately below the top mount brackets (in-line) Roof stand-off bracket GST-LS6405 (6’, 9’, & 12’ tanks) GST-LS6411 (7’ tank) Ladder Top mount brackets GST-LS6406 (Right) GST-LS6412 (Left) Ladder Standoff Bracket GST-LS6403
RkJQdWJsaXNoZXIy MTA3MzU=