Hog Slat Inc. Newton Grove, NC USA Sept. 2021 24 Feed Bins 6. Attach the top safety cage ring GST-LS6413 (small Ring) flush to the top of the ladder extension rails. 7. Bolt the two loop halves together with the HS714 Truss Head bin bolt and HS722 Serrated Flange Nut. Tighten all bolts secure. Ensure the Truss Head of HS714 is to the inside of all cage loops GST-LS6417 GST-LS6404 4. Attach the GST-LS6417 to the roof ladder using two GST-LS6404 and one HS717 Carriage bolt. 5. Attach the GST-LS6416, 48” Tube to roof panel seem at the third hole from the ladder support bracket, using the HS712 bin bolt already installed. Slide the GST-LS6425 up or down the handrail to align tube with the top panel seam hole.
RkJQdWJsaXNoZXIy MTA3MzU=