Hog Slat Inc. Newton Grove, NC USA Sept. 2021 3 Feed Bins Hog Slat General Page General Installation Notes: Installation of this equipment and related OEM equipment should be in accordance with these instructions, OEM’s installation instructions and local codes (if applicable). Failure to follow specified instructions may cause damage to equipment and/or personal injury or death. Take special note of any Warnings or Safety Decals on the equipment and in manuals. Always wear protective clothing and any applicable Personal Protective Equipment (Safety Glasses and/or Ear Plugs) when working with the equipment. Discarded materials, equipment and boxes should be recycled in accordance with local and national codes. Support Information Hog Slat Feed Bins are designed for grains and/or free flowing materials. Using this equipment for any other purpose or in a way not within the operating recommendations specified in this Manual will void the Warranty and may cause injury or death. Identification of Hardware: No hardware substitutions are permitted unless noted. WARNING! Grade 8.2 Markings Do NOT place feed bins in direct air flow of exhaust fans. HS712 5/16” x 1” Hex Head Bin Bolt HS714 5/16” x 3/4” Truss Head Bin Bolt HS722 Serrated Flange Nut
RkJQdWJsaXNoZXIy MTA3MzU=