Hog Slat Inc. Newton Grove, NC USA May 2024 8 Plastic Flooring System 6. For flooring areas wider than 65 feet (20 m), it is necessary to install an expansion gap by using a double supporting beam. Always use the end fillers to finish the expansion gap and flooring installation on each side. At least a one inch gap must be present at each expansion joint and at any end where the floor is against a wall that is parallel to the fiberglass beams. Expansion Gap with End Plugs HSFBM135-EC Beam End Caps Cut for Expansion Gap Cut one side of each end cap where shown below
RkJQdWJsaXNoZXIy MTA3MzU=