Hog Slat Plastic Slat Flooring Handling & Installation Manual

Hog Slat Inc. Newton Grove, NC USA December 2018 13 Plastic Flooring System Removal of a Single Slat • When removing a slat, remove the corresponding row of slats. • Start with removing at the beginning of the row which should be removed • Put your feet on the outer edges of both rows which are adjacent to the slat / row that you want to remove. • Lift the slat until it is detached from the beam. Proceed with this on the opposite side of the slat until the entire slat is completely detached from the beam. • Unlock the slat from the following one and remove • Repeat these steps until you reach the slat you want to remove on until you finish dismantling the row. Make sure not to treat the slats with full force or to excessively pry them since the interlocking system between the slats can only be unlocked by lifting the whole slat one side at a time from the supporting beams. Bolting Accessories for Mounting Pen System, Feeders, etc. Plastic Anchors for flooring J-bolt attaches onto fiberglass beams Duo Track support system