Hog Slat Inc. Newton Grove, NC USA December 2022 12 Wind Storm Fans Assemble cone panels by placing tabs into slots until the flat is formed. Panels should be assembled so the half-moon drain tabs face installer and the slots are oriented to the left when installer is on side closest to drain tabs. Stand the assembly up (longer edge down) and lock together the final connection. Ensure tabs are completely bottomed out into slots then secure all panels with supplied fasteners by installing on the CENTER hole pattern. 10. Remove butterfly from packaging, ensure outside circumference is free of dirt, oil, or debris. Apply adhesive weather stripping to entire surface between all mounting holes. Finally remove adhesive backing.
RkJQdWJsaXNoZXIy MTA3MzU=