Hog Slat Inc. Newton Grove, NC USA December 2022 7 Wind Storm Fans Assembly IT IS HIGHLY RECOMMENDED THAT ASSEMBLY AND INSTALLATION BE PERFORMED BY A MINIMUM OF 2 PEOPLE. 1. Remove packaging from fan and cone if applicable. • Locate hardware kit(s) and supplied literature and store for later use. • Ensure not to damage the fan or components during this step. ! FAN MUST NEVER REST ON PROP, SAWHORSES SHOULD BE USED FOR ANY STEP PRIOR TO MOUNTING ! 2. Hardware Bag Number 1 Should be used for this step Remove fan from crate and support so prop does not carry any load. Remove 2 screws attaching the top panel to the venturi. Lift the top panel until the flange on the top panel is flush with the venturi Secure with screws from Hardware Bag Number 1 beginning in the center and working outward. Repeat for the left, right, and bottom panels. Finally fasten the corners of the top and bottom panels to the right and left panels.
RkJQdWJsaXNoZXIy MTA3MzU=