Shop Online

White 10' long straight PVC tubing for Grow-Disk and chain disk systems using model 236/60 pipe.

GrowerSELECT® 2" turkey feed line pipe. 18 gauge G90 galvanized roll formed steel.

Pilot flame cover for Gasolec® G12 brooder heater.

Replacement mechanism top for Plasson® Broiler drinker.

V-Clamp (manifold support) for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #24 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 brooders (part #20 in diagram 2).

1.9mm Main Burner Orifice - LP for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #25 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 (part #21 in the diagram 2).

3/8" x 2" Bolt zinc

6'0" 4.1 oz., Single Hem Curtain

(Part #18) Aerotech® 30 RPM Gearmotor w/ Brake

American Coolair® Fan Blade for 42" NBF Fans

Replacement Lower Stem Nut for Dosatron DM11F

Clear PVC feed line tube for Grow-Disk Chain Disk feed systems. 2.36" OD x 10' long.

Replacement motor for National Incinerator HD 500. Works with the LP Gas incinerators as well (part #12 in the diagram).

Rugged 1/2 HP submersible pump with cast iron housing built for continuous operation in cool cell tanks. Automatic operation.

Vantek® V-Gard CSS System is a blend of 440LV Epoxy and Fumed Silica thickener that is designed for thinner overlays or wall coatings that can be easily roll coat applied.

(Part #11) Wayne® Diesel Burner Oil Line Assembly for Burn Easy® Incinerators.

(Part #26) #31 Main Burner Orifice - NG for GRO40-L2, GRO40-L3, & GRO40-L9 brooders.

3/8" x 2-1/2" Bolt zinc

Replacement Nuts for Lid forDosatron DM11F (11 required)

(Part #10) Hired Hand® Shaft Rod Assembly for Hired Hand® PowerTrak machine.

#50 Main Burner Orifice - LP/Butane for GRO40-L2, GRO40-L3, & GRO40-L9 brooders (part #27 in diagram 1), as well as GRO40-CR-N5 & GRO40-CR-L5 brooders (part #23 in diagram 2).

(Part #14) 1/8" x 3/4" Cotter Pin for Proterra® AGLA47859 & AGLA48028 Curtain Winch Series.

3/8" x 3" Bolt zinc

Standard 4.2 oz