HSMANUAL-255 February 2026 2|Page Classic Pullet Pan Feeding System Safety Information Caution, Warning and Danger Decals have been placed on the equipment to warn of potentially dangerous situations. Care should be taken to keep this information intact and easy to read at all times. Replace missing or damaged safety signs. Safety–Alert Symbol This is a safety–alert symbol. When you see this symbol on your equipment, be alert to the potential for personal injury. GrowerSelect equipment is designed to be installed and operated as safely as possible...however, hazards do exist. Signal Words Signal words are used in conjunction with the safety–alert symbol to identify the severity of the warning. DANGER ............identifies immediate hazards which WILL result in severe personal injury or death. DANGER WARNING............ identifies hazards or unsafe practices which COULD result in severe personal injury or death. WARNING CAUTION ...........identifies hazards or unsafe practices which COULD result in minor personal injury or product or property damage. CAUTION WARNING – ROTATING AUGER This decal is placed on the clean-out cover of the GROWFLEX Auger Control Unit. Severe personal injury will result if the electrical power is not disconnected, prior to servicing the unit. Use caution when working with the Auger – springing auger may cause personal injury. DANGER – ELECTROCUTION HAZARD Disconnect electrical power before inspecting or servicing equipment unless maintenance instructions specifically state otherwise. Ground all electrical equipment for safety. All electrical wiring must be done by a qualified electrician in accordance with local and national electrical codes. Ground all non-current carrying metal parts to guard against electrical shock. Apart from motor overload protection, electrical disconnects and over-current protection are not supplied with the equipment.
RkJQdWJsaXNoZXIy MTA3MzU=