HSMANUAL-255 February 2026 9|Page Classic Pullet Pan Feeding System Feeder Assembly Instructions Step #1: If using the HS8000-18 Restrictor, push it upward inside the HS8000-19* cone bottom. Be sure that locking tabs snap in the appropriate slot as shown. If you are not using a Restrictor Cone, please proceed with the next step. Step #2: Slide the HS8000-19* Cone Bottom up inside the HS8000-21 Adjuster until the flood window is completely closed. Step #3: Slide the assembled cones up into the chosen grille. Be sure to properly align the small arrow on the adjuster with the desired number for the non-flood feed level setting.
RkJQdWJsaXNoZXIy MTA3MzU=