HSMANUAL-255 February 2026 10|Page Classic Pullet Pan Feeding System Step #4: If using the HS8000-24 collar for locking out the flood window function, install by simply placing it over the cone so that it rests on top edge of the adjuster. If not, proceed to next step. Step #5: Install the HS8000-17 Slide Shutoff by sliding it through the designated slot until the small retention pops through to the side edge of the cone as shown. 1.75” Ribbed Feed Tube 45mm Smooth Feed Tube Step #6 (On Ribbed Tube): Install the HS8000-22 Anti-Rotation Device on the feed tube by placing the tube rib in the appropriate slot per the indexing guide. The slots should be facing the direction of the feed hopper when installed. Step #6a (On Smooth Tube): If installing HS8000-22 Anti-Rotation Device on smooth 45mm tubing, snap device adjacent to the feed tube hole. Device can be secured to the pipe using a size SAE 36 hose clamp (PN# HSHC-36) over the shown hose clamp indent of HS8000-22.
RkJQdWJsaXNoZXIy MTA3MzU=